SCOPE OF APPLICATION:
IN INDUSTRIAL ENTERPRISES
High-precision production, hot shops, large warehouses and other production areas.
High-precision production, hot shops, large warehouses and other production areas.
IN SCIENTIFIC, CULTURAL and FINANCIAL INSTITUTIONS
Museums and galleries, archives and libraries, banks, etc.
Museums and galleries, archives and libraries, banks, etc.
IN MEDICAL INSTITUTIONS
Magnetic resonance imaging centres
Magnetic resonance imaging centres
TECHNICAL FEATURES
Cooling capacity from 6 to 208 kW
16 standard sizes
3 types of cooling
16 standard sizes
3 types of cooling
Development of a constructive solution for a specific project
Various air flow direction options
Refrigerants: freon R410A, water, water-glycol mixture
Various air flow direction options
Refrigerants: freon R410A, water, water-glycol mixture
TYPES
cabinet air conditioners
BASIC EQUIPMENT
The main components included in cabinet precision air conditioners, type F:
- Galvanized steel casing with sound-insulated panels painted RAL7021;
- Copper-aluminum evaporator heat exchanger with stainless steel drain tray for condensate collection;
- Scroll hermetic compressor (in Freon circuit models;
- Electrical panel with main switch and phase control relay. The control system is powered by a 24VAC transformer;
- Condensing unit fan speed controller;
- Solenoid valve;
- Carel pCO5 controller with built-in clock card;
- Russian language display;
- Inter-unit communication (Carel pLan protocol);
- Electronically commutated indoor unit fans;
- Air temperature and humidity sensor;
- Electronic expansion valve ERV;
- Protection against compressor operation at high pressure;
- Protection against compressor operation at low pressure;
- G4 class air filters with differential pressure switch;
- Differential differential pressure switch of the air filter;
- Differential differential pressure switch of indoor unit fans;
- Switching off the air conditioner by external "Fire" signal;
- Output of "General Alarm" signal to external dispatching system;
- Compressor crankcase heating;
- Transformer inrush current limitation system;
- Voltage, sequence and phase skew control relays
ADDITIONAL EQUIPMENT
In accordance with the requirements for functionality and purpose, cabinet air conditioners can be equipped with additional options. See more
MAIN ADVANTAGES
 HIGH PRECISION AIR CONDITIONING High-precision maintenance of temperature (±1°C) and humidity ±5% in the room in accordance with high temperature standards. |
 COOLING AT HIGH THERMAL LOADS Efficient and flexible cooling of rooms with high heat density. Successful operation in peak heat load zones. Monitoring and elimination of emerging local overheating zones. Automatic adjustment of the air flow based on the level of thermal load. |
|
 ENVIRONMENTAL AND SAFETY The use of environmentally friendly and safe materials using resource-saving and low-waste technologies. Use only environmentally friendly R410A refrigerants that minimize harmful effects on the environment. The products have a declaration of conformity and quality certificates. |
 ADAPTABILITY Easy deployment and adaptation of air conditioning systems to the requirements and features of the installed IT infrastructure, as well as to the systems that will be installed indoors. Compatibility of air conditioning systems with racks from any manufacturer. Implementation of non-standard design technological solutions. |
|
 ENERGY EFFICIENCY Reduction of energy consumption at your enterprise thanks to the latest design solutions and energy-efficient components from the world's best manufacturers (fans with EU electronic switching, scroll compressors, electronic control valves, "smart" software). The power consumption for hidden cooling is minimal. |
 MODULARITY The ability to increase the power of air conditioning systems as the IT infrastructure expands, starting from a minimal configuration. Possibility of creating various combinations of air conditioning systems and IT infrastructure with different cooling capacities, different degrees of redundancy. |
|
| OPERATION IN HARSH CONDITIONS Designed to work in Russian climatic conditions. Operation of air conditioners without failures at outside air temperatures from -60 to +40°C, which allows the equipment to be used in all climatic zones of the Russian Federation. For operation in winter conditions, air conditioners are equipped with low-temperature sets. |
MINIMAL OPERATING COSTS Low-cost maintenance of VYBOS equipment with quick replacement of modules in hot-swappable mode. With the VYBOS system, our customer receives economical energy consumption, minimal cost of ownership, high-quality service and maintenance directly from the manufacturer |
CONTROL
Each unit of the VYBOS series is equipped with an advanced control, a microprocessor at 16 bit and a FLASH memory to guarantee high speed software performance and the possibility of managing multi-language configuration masks and different serial communication protocols. The control, receiving temperature and humidity (if present) values, activates the different functions (cooling – heating – humidification and dehumidification) in order to maintain the set point conditions. All the safe protections are linked to the control software, allowing a high security level in case of failure. The user interface is by means of a LCD video terminal, where it is possible to directly manage the control parameters, while the main parameters are protected by a password, guaranteeing higher protection. All the electronic boards can be connected to a local network named pLAN (Local Area Network) that is able to manage 8 units at most. (For more information, see the control service manual). Also, the management of a electronic expansion valve (EEV) is available.
CONNECTIVITY
Some electronic boards or communication protocols (optionals) are available. They allow the connection to the main BMS::
- pCOWeb Board.
- RS485 Board for the direct connection to CAREL, MODBUS protocols and to external GATEWAY.
- RS232 Board for the management of an analogical or GSM modem for SMS sending.
- Ethernet Board to interface with communication standards such as SNMP (v1-v2-v3), FTP, HTTP, Bacnet/Ethernet and BacnetIP.
- BACnet/MSTP Board in RS485.
- CANbus Board.
- LON WORKS Board for FTT-10A or RS485 interface.
- TREND Board.
- Memory expansion for the analysis of the alarm history through the specific program WINLOAD. Clock board that allows the local management of alarm history, besides the time band running.
AIRFLOW DIRECTIONS TYPES
 |
AIRFLOW DIRECTIONS TYPES. These units have suction from the top and discharge from the bottom. These are normally installed in raised floors, to constitute the plenum for distribution through the ambient. |
  |
AIRFLOW DIRECTIONS TYPES. These units have air discharge upwards, normally connected to distribution channels or a false ceiling. The most common type is that with air return at the front of the unit (O), but versions are also available with air return from the base of the conditioner (B). Among the available accessories, there is a plenum for air diffusion into environment, with grille with double order fins and with available opening also on 2 or 3 sides. |
 |
AIRFLOW DIRECTIONS TYPES. These units have suction from the top, discharge from the front side. The air intake is carried out through the air ducts located in the serviced room. |
 |
 |
 |
 |
LICENSES AND CERTIFICATES
 Compliance with the requirements ГОСТ Р ИСО 9001-2015 (ISO 9001:2015) Quality management system in relation to the development and production of high-tech climate, energy equipment and warranty power supply systems VYBOS. |
 Compliance with the requirements ГОСТ Р ИСО 14001-2015 (ISO 14001-2015) Environmental management system in relation to the development and production of high-tech climate and energy equipment and warranty power supply systems VYBOS. |
 Compliance with the requirements ГОСТ Р ИСО 14001-2016 (ISO 14001-2015) "Environmental management system. Requirements and application guidelines" in relation to the development and production of high-tech climate and power equipment and systems of guaranteed power supply of VYBOS. |
 Compliance with the requirements ТС 010/2011 "On the safety of machinery and equipment", ТР ТС 004/2011 "On the safety of low-voltage equipment", ТР ТС 020/2011 "Electromagnetic compatibility of technical equipment" |
 "The best energy efficient precision air conditioner" Certificate from the Russian Union of Refrigeration Industry Enterprises "ROSSOYUZHOLODPROM". |
FULL
SERVICE SUPPORT
| PRODUCTION The only Russian company designing and manufacturing precision air conditioning systems in Russia. At our disposal are 2 full-cycle production shops, as well as a design and technical department, warehouse, assembly and testing departments. |
INFORMATION SERVICES Technical consultations throughout the entire period of equipment operation. Training and preparation of the buyer's personnel for the safe and efficient operation of the purchased equipment. |
PROJECTING Design of air conditioning systems for design institutes and industry organizations. Development of documentation (pre-project analysis, terms of reference, feasibility study, technical and working draft) and selection of equipment. |
||
| DELIVERY Free delivery of goods to the place of operation, to the terminal of a third-party transport company within Moscow and Moscow Region. Assistance to the transport company in delivering the product to customer sites throughout Russia. Prompt delivery of spare parts and components. |
GUARANTEE Guarantee of equipment compliance with the declared technical characteristics, subject to compliance with the conditions of transportation, storage, installation, operation and maintenance, for a period of 1 year. Subject to a contract for service and diagnostics, it is possible to extend the warranty period to 5 years. |
INSTALLATION AND MOUNTING Putting equipment into working condition on site (installation, installation) and demonstrating in action. Ensuring that the product is fully ready for use during the entire period of its stay with the consumer. |
||
| DOCUMENTATION Transfer of a set of technical documentation to the customer's personnel responsible for the operation of the product for maintenance of operational documentation. The set includes: design documentation, technical description, installation and operation manual, serial passports |
SERVICE MAINTENANCE Comprehensive equipment maintenance, including scheduled maintenance and technical work by the VYBOS service center and certified service centers of partner companies in the regions of the Russian Federation. Support for the entire period of equipment operation by highly qualified specialists. |
COMPONENT WAREHOUSE Stock availability of the most demanded spare parts and consumables, close cooperation with suppliers of components. Provision of original spare parts and parts for the entire period of operation at wholesale prices. |
||
